The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares G5 Convert T3 T4 1000 SP Cali 2 Engines

Sort by Title

Sort by Price

Page 19 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Timing Sprocket Nut Tool (Bosch and Saprisa models)

TOA18651 Fits 850/1000 ALL Models, V7 Sport, 850 GT, V7 Sport, V11 Sport

Tool for crankshaft timing sprocket nut, this is a superior design tool intended for repeated use. Use for clutch centre nut on V11 Sport. Will not reach timing sprocket nut on models with Ducati charging system.

Also fits swingarm spindle nut on Stelvio.

Half inch socket drive

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

18927651 GU18927651 18 92 76 51
1892 7651 1892.7651 18.92.76.51

£41.00

INC VAT

£34.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Starter Ring Gear

ENA17900 Fits V7 Sport, 850 GT, 850/1000 ALL Models, Cali 1100, Cali EV, Cali Jackal, Cali Stone, Cali Aquila Nera

Dimensions:
240mm diameter

Starter ring gear

See ENA98420 for bolts

This part is available by special order, request a quote

17067900 GU17067900 17 06 79 00
1706 7900 1706.7900 17.06.79.00

£195.00

INC VAT

£162.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Piston Ring Compressor Tool

TOA23201 Universal Part

Piston ring compressing tool, compresses piston rings to fit into bore. Without this tool you risk snapping piston rings, the tool also speeds up the fitting of new rings

For 57mm - 125mm bores, supplied with hex key for bore adjustment. Not suitable for CARC models

This part is available by special order, request a quote

£48.00

INC VAT

£40.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Thermometer Dipstick Short Screw In Type

ENA30951 Fits 1000 SP, Le Mans 2, Convert, G5, Le Mans 1, T3, T4, 850T (Late Models), 750S, S3, V7 700, V7 Special (1969-1971), 850 GT

Dimensions:
121mm from end to sealing o ring

Short screw in polished alloy thermometer dipstick with O ring for models without a sump extension. Shows oil temperature in degrees celcius

Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick

This part is available by special order, request a quote

17004951-z 17004951 GU17004951 17 00 49 51
1700 4951 1700.4951 17.00.49.51

£68.00

INC VAT

£56.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Big End Bolt

ENA30260 Fits 850 GT, V7 Sport, 750S, S3, 850/1000 ALL Models, Cali 1100, Daytona 1000

Dimensions:
60mm long excluding head

Con rod bolt

Also known as Guzzi ref. 30062200 , supercedes Guzzi ref 14062201. Tighten to 4.6 - 4.8kgm

This part is available by special order, request a quote

30062260 GU30062260 30 06 22 60
3006 2260 3006.2260 30.06.22.60

£32.00

INC VAT

£26.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Engine Sump

ENA14035 Fits S3, 850/1000 ALL Models, Cali 1100 (1994-1997), 1100 Sport Carb

Complete replica sump for 850, 1000 and some 1100 models. Out of production for years, this is a good opportunity to replace a chipped or cosmetically damaged sump on your Guzzi

This part is available by special order, request a quote

14003500 GU14003500 14 00 35 00
1400 3500 1400.3500 14.00.35.00

£150.00

INC VAT

£125.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Camshaft Cover Plate

ENA12003 Fits 750S, V7 Sport, S3, 850/1000 ALL Models, Daytona, Centauro, Cali 1100 (1994-1997), 850 GT, V7 Sport, 1100 Sport ALL, 1200 Sport (2006-2007), Cali EV, Breva 1100, Breva 1200, Cali Classic, Cali Jackal, Cali Special Sport, Cali Vintage, Cali Aquila Nera, Griso 1100, Norge (2006-2010), Quota 1100ES, MGS01, V11 Sport

Dimensions:
35mm OD

Aluminium cover plug for camshaft at rear of crankcase

This part is available by special order, request a quote

12003900 GU12003900 12 00 39 00
1200 3900 1200.3900 12.00.39.00

£7.00

INC VAT

£5.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Pump Key

ENA13300 Fits 850/1000 ALL Models, Bellagio, Breva 850, Breva 1100, Griso 850, Griso 1100, Norge 850, Norge 1200 (2 valve), 1200 Sport (2 valve), Cali 1100 (1994-1997), Cali EV, V7 Sport, V11 Sport ALL, Quota 1100, MGS-01, Centauro, Daytona, V35, V50, V65, 1100 Sport

Dimensions:
7.45mm long

Woodruff key for oil pump shaft

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

13148300 GU13148300 13 14 83 00
1314 8300 1314.8300 13.14.83.00

£3.30

INC VAT

£2.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Polished Rocker Cover Set Round Barrel

ENA14235 Fits T3, T4, G5, Convert, 850T, V7 Sport, S3, Le Mans 1, Le Mans 2

Set of highly polished aluminium round barrel rocker covers (Guzzi ref. 17023550 or 17023560). Ideal for finishing off your restoration project

This rocker cover set also known as Guzzi ref. 14023550, these can be fited to square barrel models if fitted with adapter kit ACA30310

This part is available by special order, request a quote

17023560 GU17023560 17 02 35 60
1702 3560 1702.3560 17.02.35.60

£285.00

INC VAT

£237.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Flywheel

ENA17670 Fits T3, T4, Spada ALL, G5, Mille GT, Cal 2, Strada 1000, T5, Cali 3 (small and medium valve), 1000S (series 2)

Dimensions:
230mm diameter

Flywheel, originally intended for dual point and Motoplat ignitions

2-33° of ignition advance. Supercedes V7 loop frame flywheel 12067000 . Weighs 4.2kg

This part is available by special order, request a quote

17067050 GU17067050 17 06 70 50
1706 7050 1706.7050 17.06.70.50

£249.00

INC VAT

£207.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 19 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23